comemso
Find the right system
Talk to application engineering
Start with the decisionApplications
Vehicle and charging station
EV TestingVehicle, EVCC and charging-release validation.EVSE TestingCharging-station development through field operation.InteroperabilityReal EV and EVSE in one synchronized test record.
Battery and advanced charging
BMS TestingCells, sensors, balancing and controlled faults.BMS + EVCC + OBCValidate the interaction of battery, charging controller and on-board charger.MCS TestingCommunication, signals, cooling and megawatt power.EV Charging EMCKeep charging communication observable under EMC stress.
Production and field
EVSE End-of-LineRepeatable acceptance and unit-level results.Commissioning & Field ServiceCommission, diagnose and verify installed chargers.Calibration & MetrologyTraceable energy verification at the charging point.
Start with the decisionProducts & PlatformsFind the right system
EVCA
EVCA PlatformCommunication, interoperability, high-power, MCS and EMC paths.EVCA ComOnlyFocused charging communication testing.EVCA Multi MobilePortable laboratory and field analysis.EVCA InteropAnalyse interoperability between a real EV and EVSE.EVCA FlexModular high-power testing and controlled faults.EVCA MCSMegawatt charging communication, low-level signals and system testing.
Easy Chester
Easy Chester PlatformEVSE production, commissioning, service and calibration.Easy Chester MicroAC EVSE installation testerEasy Chester UltimateAC and DC EVSE installation testerEasy Chester CalimeraAC and DC EVSE calibration systemEasy Chester EOL / EOL HPCEVSE end-of-line production tester
Battery, software and EMC
Battery Cell SimulatorBMS testing from compact bench to high-voltage HiL.comframeConfiguration, synchronized analysis and automation.EMC LinkOptical charging communication through the chamber boundary.
Start with the decisionSoftware Capabilities
Understand and challenge
Automated Standards AnalysisMeasured behaviour, normative context and highlighted deviations.Professional SimulationConfigure nominal, boundary and non-conform behaviour.Manipulating GatewayTest a live correction hypothesis between real partners.
Reproduce and automate
Charge PlaybackReproduce the charging partner for the DUT.Charge Cycle AutomationTurn saved configurations into repeatable campaigns.Conformance Test LibrariesVersioned executable standards-based test logic.
Software and integration
Capabilities HubConnect the capability model across EV, EVSE and BMS testing.EVCA Capability HubExplore the detailed EV charging capability stack.comframeThe shared test-intelligence environment.Integration & APIsREST, Python, CI/CD and laboratory orchestration.Protocol & Domain ModulesSelect released domain depth.
Start with the decisionStandards & Knowledge
Standards and test logic
Charging, Safety & EMCCharging behaviour, field safety, editions and test boundaries.Conformance Test LibrariesReleased executable test logic, verdicts and evidence.AFIR for EV ChargingRegulation, responsibility and verifiable evidence.
Methods and terminology
Knowledge CenterTechnical explanations, methods and application guidance.GlossaryStable charging and BMS test terminology.EVSE Calibration MethodsCompare controlled real load and reference measurement.Battery Cell SimulationCells, balancing, faults, precision and BMS HiL.
Documents and tools
Resources LibraryCurrent brochures, webinars, guides and checklists.Charger Uptime CalculatorEstimate downtime and field-service impact.EVSE Inspection GuidePractical commissioning and inspection workflow.BMS testing whitepaperTemperature, environment, simulation and test wiring.Technical newsletterChoose product updates and events relevant to your tests.
Start with the decisionCompany
Company
About comemsoEngineering purpose, history and operating companies.Development & manufacturingShort paths from development to system testingQuality & CertificationsManagement systems, validation and calibration evidence.Customer ProofNamed stories, endorsements and published configurations.SustainabilityEnvironmental management and measured progress.
People and network
Customer Care TeamDelivery, commissioning, training and support.Sales PartnersRegional commercial and service access.CareersWork on deep e-mobility testing.
Updates and contact
News & EventsProjects, releases, webinars and company updates.Request a technical demoDiscuss your test task with the comemso team.ContactSales, support and locations in one place.Legal documentsImprint, privacy, GTC, EULA and WEEE.
Product & softwarePublished:

CharIN CCTS validation for EVCA: DC EVSE Basic and Extended

comemso announced CharIN recognition of its EV Charging Analyzer as a validated Conformance Test System for the defined DC EVSE Basic and Extended scope.

Read articleAll news & events
CharIN CCTS validation for EVCA: DC EVSE Basic and Extended

At a glance

  • DC EVSE
  • Charging System Basic + Extended
  • Defined CharIN CCTS scope

What the validation covers

The announcement concerns the Charging System Basic and Extended DC EVSE scope within the CharIN Conformance Testing System programme. It addresses the test system and implementation of the applicable CharIN test cases.

A defined conformance route

The release refers to IEC 61851, DIN 70121 and ISO 15118 within that defined scope. The relevant CharIN umbrella documents, test-library release and system configuration determine which cases can be executed.

What this means for a test programme

Manufacturers and laboratories can use the applicable validated test configuration as part of their conformance workflow. Test-system validation does not itself certify a connected charging station or establish coverage of every ISO 15118 edition.

Continue with the engineering task

Conformance Test Libraries

Explore the current test approach and configuration.

EVCA platform

Explore the current test approach and configuration.