comemso
Contact
Product Finder
Start with the decisionApplications
Vehicle and charging station
EV TestingVehicle, EVCC and charging-release validation.EVSE TestingCharging-station development through field operation.InteroperabilityReal EV and EVSE in one synchronized test record.
Battery and advanced charging
BMS TestingCells, sensors, balancing and controlled faults.BMS + EVCC + OBCValidate the interaction of battery, charging controller and on-board charger.MCS TestingCommunication, signals, cooling and megawatt power.EV Charging EMCKeep charging communication observable under EMC stress.
Production and field
EVSE End-of-LineRepeatable acceptance and unit-level results.Commissioning & Field ServiceCommission, diagnose and verify installed chargers.Calibration & MetrologyTraceable energy verification at the charging point.
Start with the decisionProducts & PlatformsProduct Finder
EVCA
EVCA PlatformCommunication, interoperability, high-power, MCS and EMC paths.EVCA ComOnlyFocused charging communication testing.EVCA Multi MobilePortable laboratory and field analysis.EVCA InteropAnalyse interoperability between a real EV and EVSE.EVCA FlexModular high-power testing and controlled faults.EVCA MCSMegawatt charging communication, low-level signals and system testing.
Easy Chester
Easy Chester PlatformEVSE production, commissioning, service and calibration.Easy Chester MicroAC EVSE installation testerEasy Chester UltimateAC and DC EVSE installation testerEasy Chester CalimeraAC and DC EVSE calibration systemEasy Chester EOL / EOL HPCEVSE end-of-line production tester
Battery, software and EMC
Battery Cell SimulatorBMS testing from compact bench to high-voltage HiL.comframeConfiguration, synchronized analysis and automation.EMC LinkOptical charging communication through the chamber boundary.
Start with the decisionSoftware Capabilities
Understand and challenge
Automated Standards AnalysisMeasured behaviour, normative context and highlighted deviations.Professional SimulationConfigure nominal, boundary and non-conform behaviour.Manipulating GatewayTest a live correction hypothesis between real partners.
Reproduce and automate
Charge PlaybackReproduce the charging partner for the DUT.Charge Cycle AutomationTurn saved configurations into repeatable campaigns.Conformance Test LibrariesVersioned executable standards-based test logic.
Software and integration
Capabilities HubConnect the capability model across EV, EVSE and BMS testing.EVCA Capability HubExplore the detailed EV charging capability stack.comframeThe shared test-intelligence environment.Integration & APIsREST, Python, CI/CD and laboratory orchestration.Protocol & Domain ModulesSelect released domain depth.
Start with the decisionStandards & Knowledge
Standards and test logic
Charging, Safety & EMCCharging behaviour, field safety, editions and test boundaries.Conformance Test LibrariesReleased executable test logic, verdicts and evidence.AFIR for EV ChargingRegulation, responsibility and verifiable evidence.
Methods and terminology
Knowledge CenterTechnical explanations, methods and application guidance.GlossaryStable charging and BMS test terminology.EVSE Calibration MethodsCompare controlled real load and reference measurement.Battery Cell SimulationCells, balancing, faults, precision and BMS HiL.
Documents and tools
Resources LibraryCurrent brochures, webinars, guides and checklists.Charger Uptime CalculatorEstimate downtime and field-service impact.EVSE Inspection GuidePractical commissioning and inspection workflow.BMS testing whitepaperTemperature, environment, simulation and test wiring.Technical newsletterChoose product updates and events relevant to your tests.
Start with the decisionCompany
Company
About comemsoEngineering purpose, history and operating companies.Development & manufacturingShort paths from development to system testingQuality & CertificationsManagement systems, validation and calibration evidence.Customer ProofNamed stories, endorsements and published configurations.SustainabilityEnvironmental management and measured progress.
People and network
Customer Care TeamDelivery, commissioning, training and support.Sales PartnersRegional commercial and service access.CareersWork on deep e-mobility testing.
Updates and contact
News & EventsProjects, releases, webinars and company updates.Request a technical demoDiscuss your test task with the comemso team.ContactSales, support and locations in one place.Legal documentsImprint, privacy, GTC, EULA and WEEE.

Live product workflow · 15 minutes

Request a Technical Demo

Tell us what you would like to understand or try. A simple question is enough to start; add your device and test conditions if you already know them.

comemso live demo with a test system, monitors and a presenting engineer
Real hardwareSee the relevant comemso test system
Real workflowFollow the application from setup to result
Your questionsDiscuss the technical boundary with an engineer
Clear next stepLeave with the next qualification decision

One focused conversation

From interface to decision in three steps.

The live technical demonstration focuses on operation, evidence and integration points relevant to your application.

01 · Context

Start with the DUT and test boundary.

Clarify the product under test, lifecycle task, interfaces and unresolved decision.

02 · Live workflow

Operate the real system.

See connection, navigation, test execution, analysis or reporting on the relevant hardware.

03 · Next step

Identify what must be qualified.

Separate proven workflow fit from project-specific ranges, standards editions, licences and integration.

Request the live session

Choose the workflow you want to see.

A short description helps the application engineer prepare the correct device, software view and demonstration sequence.

DurationFocused 15-minute online session
FormatLive webcam and screen sharing
ResultClear next qualification step
Product or platform

Choose a product above to fill the product field below, or enter another product or platform.

Your demo request

* Required fields.

We use your contact and test details to handle this request. Read the privacy information. Sending a request does not subscribe you to marketing.

Other contact options

Our team will contact you to agree the workflow and appointment after you submit your request.

Frequently asked questions

Technical demo request FAQ

Do I need a complete specification?

No. You can choose “Other or not yet defined”. A question or a broad test goal is enough to start; add your device and test conditions when known.

What should we prepare for the demonstration?

Agree the focus with the team. A product introduction, an existing recording and a live-device test require different preparation.

Can we discuss our own test case?

Include a short description in the request so the team can assess the relevant demonstration and information needed.

Talk to comemso

Talk to the people behind the systems.

Bring the application, company question or collaboration topic directly to the responsible team.

Find your test solutionContact application engineering