Practical day and networking
Easy Chester Day One
A new test assignment – now what? We show you live on a charging station how to test AC and DC charging stations: which standards apply, which test equipment you need and what the procedure looks like.
Your benefit
What you take away from the day
Same challenges, new perspectives
You meet other test service providers, service experts and specialists from the charging infrastructure sector. You discuss questions from practice and make new contacts.
Test procedures live on the charging station
We show selected test procedures step by step: from the charging function and electrical safety tests to the test report.
Get to know Easy Chester Ultimate and Micro
Ultimate combines AC charging tester, DC charging tester and installation tester in one portable system. Micro is the compact tester for wallboxes and AC charging stations.
Content of the day
From test assignment to test result
A charging station that charges has not yet been fully tested. Depending on the test assignment, electrical safety, charging function, communication and the behaviour in the event of a fault all count.
Know what needs to be tested
Initial verification or periodic inspection? The requirements depend on the test assignment. Among others, we look at:
- DIN VDE 0100-600: initial verification of low-voltage electrical installations
- DIN VDE 0105-100: operation of electrical installations and periodic inspections
- DIN EN 61851-1 (VDE 0122-1): general requirements for conductive charging systems
- DIN EN 61557 (VDE 0413): requirements for electrical measuring and test equipment
Which requirements apply depends on the installation and the test assignment.
Test electrical safety
How do you test insulation resistance, protective conductor resistance and residual current devices? You see selected safety tests according to VDE live in use.
Test AC and DC charging functions
A successful charging session is a good start. We show how to examine the charging function and communication and how to check the charging station’s response to simulated faults.
Document results traceably
From measured value to test report: you see how test results and charging session data are recorded and documented in a structured way.
Test equipment
Three test areas in one instrument
Testing AC and DC charging stations often takes several test instruments. The new Easy Chester Ultimate combines three test areas in one portable system. At Day One, we show you how it works directly on a charging station.
AC charging tester
Tests the AC charging function, communication and defined fault responses.
DC charging tester
Examines DC charging sessions, charging protocols and the behaviour in simulated faults.
Installation tester
For optional electrical safety tests, including insulation and protective conductor resistance and residual current devices.
Touchscreen operation, guided test procedures and digital documentation support you in commissioning, maintenance and service.
For wallboxes and AC charging stations: We also show the compact Easy Chester Micro. It tests the charging function and communication according to ISO 15118-2 and, optionally, electrical safety.
Schedule
Your programme from 09:30 to 15:00
Reception is on the 3rd floor of the new building. Lunch and networking take place on the 4th floor.
| Time | Programme item |
|---|---|
| 09:30 | Arrival and registration Reception on the 3rd floor of the new building |
| 10:00 | Welcome to comemso Welcome and introduction by the management |
| 10:30 | Testing AC/DC charging stations: Easy Chester Ultimate live Presentation of the new test system, step by step on a charging station |
| 11:45 | Open exchange First questions and conversations with other participants |
| 12:00 | Lunch together Networking on the 4th floor of the new building |
| 13:15 | Electrical safety tests according to VDE Selected test procedures for the initial commissioning of charging stations, shown in practice |
| 14:00 | Questions, experience and networking Discussing technical challenges, personal exchange |
| 15:00 | Official close Farewell, with time for further conversations |
Dates
Upcoming dates
Please state your preferred date when you register by email. More dates will follow.
- Wednesday, 25 November 202609:30 to 15:00comemso, Karlsbader Str. 13, 73760 Ostfildern (near Stuttgart)free of charge
Registration
Register now
Register by email with our sales team. Please include your name, company, phone number and preferred date. Registration and participation are free of charge.
Good to knowWe will confirm your registration by email.
We use your details to process your registration. Read the privacy notice. Registering does not subscribe you to marketing emails.
Contact
Questions about Easy Chester Day One?
Whether initial commissioning or periodic inspection: our sales team will be happy to answer your questions.