comemso
Find the right system
Talk to application engineering
Start with the decisionApplications
Vehicle and charging station
EV TestingVehicle, EVCC and charging-release validation.EVSE TestingCharging-station development through field operation.InteroperabilityReal EV and EVSE in one synchronized test record.
Battery and advanced charging
BMS TestingCells, sensors, balancing and controlled faults.BMS + EVCC + OBCValidate the interaction of battery, charging controller and on-board charger.MCS TestingCommunication, signals, cooling and megawatt power.EV Charging EMCKeep charging communication observable under EMC stress.
Production and field
EVSE End-of-LineRepeatable acceptance and unit-level results.Commissioning & Field ServiceCommission, diagnose and verify installed chargers.Calibration & MetrologyTraceable energy verification at the charging point.
Start with the decisionProducts & PlatformsFind the right system
EVCA
EVCA PlatformCommunication, interoperability, high-power, MCS and EMC paths.EVCA ComOnlyFocused charging communication testing.EVCA Multi MobilePortable laboratory and field analysis.EVCA InteropAnalyse interoperability between a real EV and EVSE.EVCA FlexModular high-power testing and controlled faults.EVCA MCSMegawatt charging communication, low-level signals and system testing.
Easy Chester
Easy Chester PlatformEVSE production, commissioning, service and calibration.Easy Chester MicroAC EVSE installation testerEasy Chester UltimateAC and DC EVSE installation testerEasy Chester CalimeraAC and DC EVSE calibration systemEasy Chester EOL / EOL HPCEVSE end-of-line production tester
Battery, software and EMC
Battery Cell SimulatorBMS testing from compact bench to high-voltage HiL.comframeConfiguration, synchronized analysis and automation.EMC LinkOptical charging communication through the chamber boundary.
Start with the decisionSoftware Capabilities
Understand and challenge
Automated Standards AnalysisMeasured behaviour, normative context and highlighted deviations.Professional SimulationConfigure nominal, boundary and non-conform behaviour.Manipulating GatewayTest a live correction hypothesis between real partners.
Reproduce and automate
Charge PlaybackReproduce the charging partner for the DUT.Charge Cycle AutomationTurn saved configurations into repeatable campaigns.Conformance Test LibrariesVersioned executable standards-based test logic.
Software and integration
Capabilities HubConnect the capability model across EV, EVSE and BMS testing.EVCA Capability HubExplore the detailed EV charging capability stack.comframeThe shared test-intelligence environment.Integration & APIsREST, Python, CI/CD and laboratory orchestration.Protocol & Domain ModulesSelect released domain depth.
Start with the decisionStandards & Knowledge
Standards and test logic
Charging, Safety & EMCCharging behaviour, field safety, editions and test boundaries.Conformance Test LibrariesReleased executable test logic, verdicts and evidence.AFIR for EV ChargingRegulation, responsibility and verifiable evidence.
Methods and terminology
Knowledge CenterTechnical explanations, methods and application guidance.GlossaryStable charging and BMS test terminology.EVSE Calibration MethodsCompare controlled real load and reference measurement.Battery Cell SimulationCells, balancing, faults, precision and BMS HiL.
Documents and tools
Resources LibraryCurrent brochures, webinars, guides and checklists.Charger Uptime CalculatorEstimate downtime and field-service impact.EVSE Inspection GuidePractical commissioning and inspection workflow.BMS testing whitepaperTemperature, environment, simulation and test wiring.Technical newsletterChoose product updates and events relevant to your tests.
Start with the decisionCompany
Company
About comemsoEngineering purpose, history and operating companies.Development & manufacturingShort paths from development to system testingQuality & CertificationsManagement systems, validation and calibration evidence.Customer ProofNamed stories, endorsements and published configurations.SustainabilityEnvironmental management and measured progress.
People and network
Customer Care TeamDelivery, commissioning, training and support.Sales PartnersRegional commercial and service access.CareersWork on deep e-mobility testing.
Updates and contact
News & EventsProjects, releases, webinars and company updates.Request a technical demoDiscuss your test task with the comemso team.ContactSales, support and locations in one place.Legal documentsImprint, privacy, GTC, EULA and WEEE.

Your solution

Find Your EV, EVSE or BMS Test System

Get a suggested system path from your selections. You can change the selections and add notes before copying, downloading or sending the brief. Technical details are optional; contact details are needed only to send your request.

Your next step

Find the right test-system path before selecting hardware.

Choose the device you want to test and its development or operating stage. Add only the technical details you know, or describe the problem in your own words. A product specialist reviews the requirements before a configuration is agreed.

What do you want to test?

Select one or more DUTs. The following questions cover all selected DUTs.

Where will you use the test system?

Select one or more applications. Each choice applies to the DUTs for which it is available.

Which charging types and technologies do you need?

Multiple selections are possible. These requirements apply to the selected EV / EVCC and EVSE / SECC tasks.

Which test functions do you need?

Optional multiple selection. All test functions intended for the selected DUTs remain available.

Would you like to add technical details?

These details are optional. Add the information that is already known for your selected DUTs.

Optional charging-system details

Charging connectors and test coverage (optional)
Required charging connectors
Separate AC / DC source and load requirements (optional)

AC source required

AC load required

DC source required

DC load required

Maximum voltage × maximum current is not an available-power promise. A 3 kW laboratory source/load and an inline field-measurement envelope are separate requirements.

Supplier releases and reference service checks (optional)

BMS application and electrical scope

Cells, CMCs and measurement quality (optional)
Sensors and insulation (optional)
Faults, sleep current and test validity (optional)
Requested BMS fault simulation
BCS integration (optional)
Requested hardware interfaces
Lab, safety and project planning (optional)