Banner
English Chinese (Simplified) French German Greek Italian Japanese Korean Portuguese Romanian Russian Spanish

Emulation of NTC/PTC temperature sensors for the high voltage area up to 1kV

The NTC/PTC-Simulator is a galvanically isolated resistor cascade, that is controlled via CAN bus in the range of 0..8MOhm. The resistor cascade can be used in the high voltage area up to 1kV and is especially designed for the simulation of temperature sensors for electric vehicle batteries. It can be used wherever an adjustable resistor is needed.

    Product Flyer:
    Temperatur-Sensor-Emulation

 

Highlights:

  • Adjustable value range: 0 Ohm ... 8 MOhm
  • Resolution: 1 Ohm
  • Accuracy: +/- 1%, 25...100 ppm/°C
  • Load carrying capacity: 0 Ohm - 130kOhm 1W, 130 kOhm - 8MOhm 125 mW
  • Reaction time: < 4ms
  • Voltage area: 0 - 1kV
  • Electrical isolation: 1 kV
  • Communication: CAN bus
  • Baud rate: 500kBd / 1 MBd
  • Channels per card: 2
  • Channels per 6HU/84TE case: 24
  • Features:Internal fault injection (short circuit, open load, injection of external voltages U1, etc.)
  • Combined configurations possible in cases with R_ISO-Check or with Battery Cell Simulator.
     
    Related Contents:
    Batteriezellen-Emulation
    R_ISO-Check
    Voltage-Peak-Absorber (for active Balancing)
    Failure Simulation Unit (FSU)
     
    Questions?

We will gladly customize the battery cell simulator to suit your needs.
All layout and software are developed directly by comemso according to ISO 9001 and produced for you as an entire system.

 

     
 

Please contact our technical sales:

Phone:  +49 7158 984 11-80
sales (at) comemso . de